If you would prefer to view console messages, enter the global configurationĬreate and name the VLANs listed in the VLAN Configuration and Port Mappings table on B1-S2Ĭonfigure the VLAN 99 interface and default gateway.Īssign VLANs to the appropriate access ports.ĭisable all unused ports and assign the BlackHole VLAN. Note: Logging to the console is turned off on B1-S2 so that the Native VLAN mismatch messages will not

Use the next-hop IP address as an argument.Ĭonfigure and optimize HQ and B1 with EIGRP routing.ĭisable EIGRP updates on appropriate interfaces. Use the exit interface as an argument.Ĭonfigure B1 with a default route to HQ. Using the addressing table for branch routers, configure and activate the LAN interface for inter-VLANĬonfigure HQ with a static route to the NewB LAN. The connections to the Internet and HQ-DataCenter are outside XYZ Corporation. The IP address for the BGP router in the Internet cloud is 209.165.201.2.Īdvertise the 192.0.2.0/24 network to the Internet.Īllow all addresses for the 10.0.0.0/8 address space to be translated using a standard access list However, it must be configuredīefore the link will come up between HQ and NewB.Ĭonfigure eBGP between HQ and the Internet. Note: The ppp pap sent-username is not graded by Packet Tracer. The user EXEC password is cisco and theĬonfigure the WAN link from HQ to the Internet using PPP encapsulation and CHAP authentication.Ĭreate a user ISP with the password of cisco.Ĭonfigure the WAN link from HQ to NewB using PPP encapsulation and PAP authentication.Ĭreate a user NewB with the password of cisco. Note: Only HQ, B1, B1-S2, and the PCs are accessible. Security configurations include SSH, port security, switch security,

Other technologies include NAT, DHCP, static and default routing, EIGRP for IPv4, interVLAN routing, and VLAN configurations. In this comprehensive CCNA skills activity, the XYZ Corporation uses a combination of eBGP and PPP for

Packet Tracer – CCNA Skills Integration Challenge

Packet tracer 8.3.1.2